CAMAG ADC 2, Руководство пользователя

Страница: 16 / 40

ADC 2
4.5. Display and function of keys
Control lamps
The control lamps in the display indicate the following status:
•
POWER ON: this lamp is lit when the instrument is switched
on.
•
ON LINE: this lamp is lit when the instrument is ON-LINE
with PC / winCATS.
The following keys are available:
DIALOG
Activates the manual parameter input mode (Method stack and
manual functions).
ARROW KEYS
5
and
6
Select the next / previous parameter (or method) in the dialog.
)
If the “SYSTEM READY” display is active, pressing these keys
will display the actual temperature and humidity. By pressing
another key, these measurements will be cleared.
ENTER
Confirms the current parameter, switches to the selected dialog
or (re-)starts the (last) selected method in manual function.
END
Interrupts the current application or switches back to the previ-
ous dialog.
)
If the “SYSTEM READY” display is active, you can enter the
manual function stack.
9
9
•
Select any manual function by arrow keys or .
Press ENTER , to start a manual function or DIALOG , if you
5 6
want to change the manual parameters.
• O
Q TEST (performs instrument’s functionality tests)
• OQ TEST = SELF TEST (since FW v. 1.01.02)
• HUMIDITY CTRL (performs a timed humidity process)
• DRYING (performs a drying step)
RINSING (performs a rinsing step)
•
LAST RESULTS (displays the results of the last run)
Manual, August 2005 Page 16