Cam Scan CS-DR8900, Руководство пользователя

Страница: 59 / 68

59
Remote Surveillance
2. Enable NAT and then set the NAT
server address. Please refer to 11.1.6
NAT Configuration for details.
3. Open IE browser on a computer,
input the NAT server address www.
autonat.com in the IE address bar
and then press enter to go to the
interface as shown below (download
and install the relative plugin
according to the popup tip if you
access the DVR through NAT for the
first time).
Input the serial number (click on the
tool bar at the bottom of the live preview
interface to see the serial number of the
DVR), user name (the user name of the
DVR, admin by default) and password
(the password of the DVR, 123456 by
default) of the DVR, select the display
language on the top right corner of the
interface and then click “Login” button
to go to the web client interface.
PPPoE Access
1. Click Start

Settings

Network

TCP/IPv4 to go to the “TCP/IPv4”
interface. Check “Enable” in the
“PPPoE settings” and then input the
username and password you get
from your ISP. Click “Apply” to save
the settings.
2. Click Start

Settings

Network

Network Status to view the IP
address of the DVR.
3. Open IE browser on a computer,
input the IP address of the DVR
like http://210.21.229.138 in the IE
address bar and then press enter to
go to the login interface. Input the
username and password of the DVR
in the interface and then click “Login”
to go to the live preview interface.
Router Access
1. Click Start

Settings

Network

TCP/IPv4 to go to the “TCP/IPv4”
interface. Set the IP address, subnet
mask, gateway, preferred DNS and
alternate DNS of the DVR.
2. Set the HTTP port (it is suggested
to modify the HTTP port because
the default HTTP port 80 might be
taken up) and enable UPnP function
in both the DVR and the router. If the
UPnP function is not available in the
router, you need to forward the LAN
IP address, HTTP port and server
port of the DVR to the router. Port
mapping settings may be different
in different routers, so please refer
to the user manual of the router for
details.
3. Get the WAN IP address of the DVR
from the router. Open IE browser
on a computer, input the WAN
IP address plus HTTP port like
http://116.30.18.215:100 in the IE
address bar and then press enter to
go to the login interface. Input the
username and password of the DVR
in the interface and then click “Login”
to go to the live preview interface.
n
Note: If the WAN IP address
is a dynamic IP address, it is
necessary for you to use the
domain name to access the DVR.
Click StartSettingsNetworkDDNS
to set DDNS (see 11.1.3 DDNS
Configuration for details). By using
DDNS function you can use the
domain name plus HTTP port like
12 Remote Surveillance