36
Click
to add a new schedule. Refer to
the picture below.
Set the schedule name and schedule
time and then click “Add” to save the
schedule. You can set day schedule or
week schedule.
: add button;
:
delete button.
Set Day Schedule
Click
and then drag the cursor on
the time scale to set record time; click
and then drag the cursor on the time
scale to delete the selected area.
You can manually set the record start
time and end time. Click
or
and
then click “Manual” on each day to pop
up a window as shown below. Set the
start and end time in the window and
then click “OK” to save the settings.
Click “All” to set all day recording; click
“Reverse” to swap the selected and
unselected time in a day; click “Clear All”
to clear all the selected area in a day.
Click “Copy To” to copy the schedule
of the day to other days. Refer to the
picture below. Check the days in the
window and then click “OK” to save the
settings.
Set Week Schedule
Click
or
and then click “Manual”
beside
to set the week schedule.
Refer to the picture below. Set the start
and end time, check the days in the
window and then click “OK” to save the
settings.
Click “All” to set all week recording; click
“Reverse” to swap the selected and
unselected time in a week; click “Clear
All” to clear all the selected area in a
week.
7.3.2 Record Schedule
Configuration
Click Start
Settings
Record
Record Schedule
Schedule
Configuration to go to the interface
as shown below. Set the schedule of
sensor record, motion record and timed
record. Click “None” in the drop-down
menu to clear the schedule. Click “Apply”
to save the settings.
7 Record & Disk Management
Содержание CS-DR8900
Страница 68: ...68...
