40
Introduction of area 2:
Button
Meaning
Click it to go to record search
interface; see 8.3 Record
Search & Playback for details.
Click it to go to backup
interface; see 8.4 Backup for
details.
Click it to go to live preview
interface; see Chapter 5 Live
Preview Introduction for details.
Click on the playback window to show
the tool bar as shown in area 3; right
click on the window to show the menu
list. The tool bar and menu list are
introduced in the table below.
Button
Menu List Meaning
--
Move tool. Click it to move
the tool bar anywhere.
Enable
Audio
Click it to enable audio. You
can listen to the camera
audio by enabling audio.
Snap
Click it to snap.
Zoom In
Click it to go to the zoom
in interface. The zoom in
interface is similar to that of
the camera window in the
live preview interface. Click
to pause the record
playing; click
to play
the record. When the record
is paused in forward playing
mode, you can click
to view the previous frame
and click
to view the
next frame.
Add Tag
Click it to add tag. You can
play back the record by
searching the added tag.
Click it and then input the
tag name in the popup
window. Click “Add” to
add tag.
Switch
Camera
Click it to switch the
playback camera. Click it
and then check the camera
in the popup window. Click
“OK” to change the camera.
Close
Camera
Click it to close the playback
camera.
Introduction of area 4:
Click
to set the date; click
to set
the time and then the playback camera
will play the record from the time you
set. You can check the record type as
required for record playback; first you
should click on the tool bar at the
bottom of the interface to clear all the
playback camera, then check the record
type ( : manual record;
: sensor
based record; : motion based record;
: schedule record) and finally click
in the playback window to add camera
for playback (the record time scale will
show the record data of the checked
record type only after the above
operations).
Introduction of the record time scale
(area 5):
A tool bar will appear after moving the
mouse to the record time scale. Click
/
to zoom the timeline; click
to recover the timeline to 24 hours’ ratio.
Drag the timeline or slide the scroll wheel
of the mouse on the time scale to show
the hidden time on the top or bottom
of the timeline. You can also click
to
show the hidden time on the top of the
timeline or click
to show the hidden
time on the bottom of the timeline. Drag
the slider at the bottom of the time scale
to show the hidden playback cameras.
The record time scale shows different
record types with different colors. The
green block stands for manual record,
red block stands for sensor based
record, yellow block stands for motion
based record and blue block stands for
schedule record. Click the record block
to set the time and then the playback
camera will play the record from the
time you set.
Drag the color block on the time scale
to select the backup area and then
right click the area or click to pop
up a backup information window. Click
“Backup” button in the window to pop up
the backup window. Select the device,
backup path and backup format and
then click “Backup” button to start the
backup.
8 Playback & Backup
Содержание CS-DR8900
Страница 68: ...68...
