Document type:
Title:
Revision date:
Revision:
User's Manual (MUT)
Mod. SY2527, Universal Multichannel Power Supply System
27/11/2000
0
NPO:
Filename:
Number of pages:
Page:
00103/97:2527y.MUTx/00
SY2527USERMANUAL_REV0.DOC
84
70
7.2
Remote operation via Terminal
Remote operation via Terminal
is intended as the interactive control and monitoring of
one or more SY2527 systems by using a remote terminal. The remote operation via
Terminal can be performed in different ways, according to the interface used to
communicate with the system. Nominally, it can be achieved by:
•
Using the RS232 interface to connect one SY2527 system to a VT100-like
terminal or to a standard PC running a terminal emulator program;
•
Using the H.S. CAENET interface to daisy-chain two or more SY2527 systems
and then controlling them from a VT100-like terminal via the RS232 interface
(
Multicrate Operation
);
•
Using the TCP/IP protocol via Ethernet to perform a Telnet connection.
The different configurations which can be arranged for Remote Operation via Terminal
are summarised in Fig. 7.22.
RS232
H.S. CAENET
Video Terminal
(ANSI VT100 or compatible;
otherwise standard PC
running a terminal emulator
program)
+
SY2527 crate configured as
CAENET controller and
connected to a terminal via
RS232
(MULTICRATE
OPERATION)
TELNET connection via Ethernet
+
+
TCP/IP Network (INTERNET/INTRANET)
SY2527 crate
1 2 3
4
1 5 6
7 8 9
.
0 -
CM
D
DEL
AC
K
1 2 3
4
1 5 6
7 8 9
.
0 -
C
M
D
D
E
L
A
C
K
Fig. 7.22 – Remote Operation via Terminal
