Document type:
Title:
Revision date:
Revision:
User's Manual (MUT)
Mod. SY2527, Universal Multichannel Power Supply System
27/11/2000
0
NPO:
Filename:
Number of pages:
Page:
00103/97:2527y.MUTx/00
SY2527USERMANUAL_REV0.DOC
84
49
7.1.9
The MAIN Menu: Channels
The
Channels
command
is selectable from the Main menu, i.e. the second command
from left in the
Menu Bar
. It enters the
Channels Window
which allows for the control
and monitoring of the channel parameters and for the review of the board status.
The
Channels Window
is shown in Fig. 7.8 (in fact, this is only a partial view of the
window since there are further parameter columns, listed on the right, which can be
displayed by moving the cursor towards right either with the keyboard arrow keys or the
compact switch).
The
Channel Window
can be divided into three sections:
•
the
Menu Bar
at the top of the window with the current access level on the top right
(e.g.
user
);
•
the
Channel Parameters Columns
in the central area;
•
the
Status Bar
at the bottom of the window.
Menu Bar
The
Menu Bar
of the
Channels Window
is different from that of the Start Up Menu
since there are two further menus:
Groups
and
View
. For details on the commands they
give access please refer to § 7.1.13 and § 7.1.14, p.55 and p.58, respectively.
Fig. 7.8 – Channels Window
