357 . . .
–
–
–
–
Section
4
6. Repeat the procedure for each
of the remaining tires in the
following order: right front
tire, right rear tire, then left
rear tire.
7. After the horn sounds twice
to confirm that the last tire
position has been stored, turn
off the ignition.
8. Set the tire pressures to the
correct level.
See the tire information label
for your vehicle's tire inflation
specifications.
9. Be sure to put the valve caps
back on the valve stems. They
help prevent leaks by keeping
out dirt and moisture.
If
SERVICE TIRE MONITOR
SYSTEM
(service tire monitor
system) appears on the Driver
Information Center display, the
tire matching process was not
completed successfully. Repeat the
procedure.
See your dealer for additional
assistance if needed.
INSPECTION AND
ROTATION
Check your tires and wheels
regularly for unusual wear or
damage.
Make sure the spare tire is secured
properly.
See the following for more
information:
• Changing a Flat Tire
- Storing Tire and Jacking
Equipment
To make your tires last longer,
have them inspected and rotated
at the mileages recommended in
your Maintenance Schedule.
$10araEscalade.fm Page 357 Wednesday, October 14, 2009 9:52 AM