Seats and Restraints
. . . 196
TUMBLING THE THIRD ROW
SEAT
Before folding a seat, always make
sure that there is nothing under or
in front of the seat.
Clear all items off the seat.
NOTICE
Damage to the rear seat or
safety belts can occur if the seat
is folded with the safety belts
fastened.
Before folding a seat, unbuckle
the safety belts and return
them to their normal stowed
positions.
1. Open the liftgate.
2. Make sure that the head
restraints are completely
lowered.
See "Head Restraints" earlier
in this section for more
information.
3. Lift the lever on the bottom
rear of the seatback on the
outboard side.
The seatback will fold forward.
The seat cannot be unlatched
from the floor unless the
seatback is folded.
4. From the rear of the vehicle,
unlatch the rear of the seat
from the floor by pulling up
on the lever.
The lever is located on the rear
of the seat, next to the handle.
5. Lift the rear of the seat unit
and fold it forward until it
locks in the stowage position.
6. Push and pull on the seat to
check that it is locked into
place.
$10araEscalade.fm Page 196 Wednesday, October 14, 2009 9:52 AM