333 . . .
–
–
–
–
Section
4
Hot Check Procedure
Perform this fluid check procedure
when the transmission tempera-
ture is in the range of 71-93°C.
The hot check procedure is the
most accurate method to check
the fluid level.
After a cold check, perform a hot
check at the first opportunity,
once the fluid reaches normal
operating temperature.
The fluid level rises as fluid temper-
ature increases, so it is important
to ensure the transmission temper-
ature is within the proper range.
1. Prepare your vehicle as
previously described under
"Checking the Fluid Level".
2. Locate the transmission fluid
dipstick.
See "Engine Compartment"
earlier in this section to
determine the location.
3. With the engine running at
idle speed, lift the handle and
remove the dipstick. Wipe
it clean and reinsert it by
pushing it down all the way.
4. Wait for 3 seconds, remove
the dipstick again and check
the fluid level.
Keep the dipstick pointed
down to get an accurate
reading.
Check both sides and read the
lower level.
$10araEscalade.fm Page 333 Wednesday, October 14, 2009 9:52 AM