303 . . .
–
–
–
Section
3
ELECTRIC BRAKE CONTROL
WIRING PROVISIONS
The wiring provisions are for the
electric trailer brake controller and
include blunt cut wires located
in the instrument panel. The
controller should be installed by
your dealer.
The harness contains the following
circuits:
• Dark Blue: Electric trailer brake
output
• Red/Black: Battery feed
• Light Blue/White: Brake Switch
• White: Ground
Maintenance When Trailer
Towing
Your vehicle will need service more
often when you're pulling a trailer.
See the Maintenance Schedule for
more on this.
Check periodically to see that all
hitch nuts and bolts are tight.
When towing a trailer, the engine
cooling system may temporarily
overheat. See Sections 4 and 5 for
more information on your vehicle's
cooling system.
■
RECREATIONAL
VEHICLE TOWING
If you decide to tow your vehicle
behind another vehicle for use at
your destination, be sure to use
the proper towing equipment.
Follow all instructions that come
with the towing equipment.
The two most common methods
for recreational vehicle towing are:
• towing your vehicle with all
four wheels on the ground
• towing your vehicle with two
wheels on the ground and two
wheels up on a dolly
$10araEscalade.fm Page 303 Wednesday, October 14, 2009 9:52 AM