C.P.Bourg BB3002 PUR Скачать руководство пользователя страница 74

Страница: 74 / 142

Operator Manual

BB3002 Page 74

Initial issue: 05/08

Latest revision: 11/08

4.12.2 Opening/closing the cover clamps:

These two buttons open and close the cover clamps.

This is useful for cleaning, removing films of glue from the non-stick cover clamp

plate.

Note: As a safety measure, clean the plate with the interlock open.

4.12.3 Restarting the graphical interface, the PLC and communication between them:

In the event of problems, it is possible to:

• Restart the touch-screen (UI).

To completely reinitialize the UI software.

• Restart the binder's computer (PLC).

To completely reinitialize the binder software.

WaRnInG:

A power OFF/ON does not reinitialize the software.

• Restart communications between the screen and the PLC.

Note: If the error continues, check the connection from the UI's serial port to the PLC.

4.12.4 Thickness value of the last booklet bound:

At anytime, the operator can also know the thickness value of the last booklet bound.

This can be used in application like “doctor booklet” in which the thickness should

be entered for the second wing length.

Содержание BB3002 PUR















































































































































Результаты поиска

Содержание BB3002 PUR

Отзывы:

Похожие инструкции для BB3002 PUR

Бренды по названию

Популярные бренды

C.P.Bourg BB3002 PUR, Руководство оператора

Результаты поиска

Содержание BB3002 PUR

Отзывы:

Похожие инструкции для BB3002 PUR

Бренды по названию

Популярные бренды