C.P.Bourg BB3002 PUR, Руководство оператора

Страница: 68 / 142

Operator Manual
BB3002 Page 68
Initial issue: 05/08
Latest revision: 11/08
4.8.11 Adjusting the creasing position:
With this button the position of the creases on the front and back can be
adjusted separately.
For example, in the case of a book with folding wing flaps, there may be 3
creases on the back: 1. Crease on the spine of the book.
2. Courtesy crease.
3. Crease for the wing.
The operator can move these 3 creases at the same time so
that the crease on the spine (crease 1 on the diagram) can
be positioned exactly on the edge of the book's spine.
Modification in steps of 0.2 mm.
Maximum value: 5 mm.
The procedure is the same for the front cover.
4.8.12 Adjusting the cover position:
This function enables you to align the cover position
according to the height of the book. The value can be
adjusted by up to ± 10 mm in steps of 0.2 mm.
Example: In N/FIRST mode.
If the cover overlaps the edge of the book by 1 mm, the
operator can correct the position by 1 mm to align the edge
of the cover with the edge of the book.
Note: This adjustment only affects the position of the cover in relation to the
book; the creases remain centred on the spine.
N
1
Rear 1.
2.
3.
N
1
Rear