C-COM Satellite iNetVu, Руководство по обслуживанию, Страница: 84 / 109

iNetVu™ Service Manual Page 84 of 109
3. Place and secure the BUC on the underside of the Feed Arm as depicted in the figure
below.
When securing the BUC, adjust the placement of the screws and brackets to ensure the
following:
a. The BUC is placed at the far right side of the Feed Arm (if facing the Reflector),
using the holes on the far right side of the Feed Arm. This will ensure that the
Flexible Waveguide does not bind or twist during Polarization Adjustments.
b. A ¼” space is left between the BUC and the Feed Arm Bar where the springs are
attached. This will ensure you have enough space to attach the Flexible
Waveguide to the BUC.
c. The RG6 Coaxial Connector end of the BUC is facing the Reflector.
d. The long screws of the Universal Transmitter Mounting Bracket Kit are fed
through the grooves on each side of the BUC, if applicable.
Fig. 44: Attaching BUC using Universal Transmitter Brackets
Polarization
Cage End
Reflector End