C-COM Satellite iNetVu, Руководство по обслуживанию, Страница: 21 / 109

iNetVu™ Service Manual Page 21 of 109
2.2.8.1. Installation Rear Antenna Cover:
Place the reflector face down.
[ New Installation:
Clean the reflector’s surface thoroughly with a grease
cutting cleaner and allow to dry. Using the supplied 1.5” hook Velcro, peel off
the back strip ½ meter at a time, and align flush with the backside edge of
the reflector. Once fully placed, apply pressure on the surface to ensure full
adhesive contact. Allow 24 hrs for full cure.
]
Position the reflector cover over unit, aligning the strap and opening with the
notch at the base of the reflector.
[ Previously Installed:
Through the openings in the cover, insert four (4)
bolts into mounting threads and tighten a few threads.
]
[ New Installation:
Proceed to Step 4
]