C-COM Satellite iNetVu, Руководство по обслуживанию, Страница: 50 / 109

iNetVu™ Service Manual Page 50 of 109
STOW Button on iNetVu™ Controllers
The
STOP/STOW
push button is located on the front panel of the iNetVu™
5000/7000/9000 Controller.
Hold down the
STOW
button for
5 seconds
and release. This will allow the iNetVuTM
Platform to automatically move to the stowed position.
iNetVu™ Mobile Software Manual Controls
1)
If you are using a 5000 or 9000 Controller, advance to the configuration menu,
and switch to
CONFIG
mode.
2)
Go to
Maintenance
and click
Advanced
.
3)
Disable
ALL
limits and click
Send
.
4)
Go to
Advanced Controls
5)
Set
Duration
to 50.
6)
Use the manual control buttons to move the dish to the physical stow position in
the following order.
a. Polarization
b. Azimuth
c. Elevation (Set the
Duration
to 10 for better control)
Turn Off the iNetVuTM Controller once the antenna is completely stowed, and contact a
C-Com Satellite Systems Inc. Technical Support Representative.