EN
44
3.6.2 Menu: SETTINGS / PRESSURE
Settings for permeate pressure parameters:
D
The main selection menu appears with
“Start“
being activated.
St
a
r
t
START
S
e
t
t
i
n
g
s
START
Fig. 11:
Main selection menu: “Start“
,
“Settings“
1. Menu level (selection menu “Settings“)
z
GENERAL
General
device settings
z
PRESSURE
Pressure of the permeate
(ACTIVE)
z
CONDUCTIVITY
Conductivity value (μS/cm)
z
WCF SETUP
Permeate output/yield WCF menu
Fig. 12:
Menu Level 1: “Settings“
Perform the general settings of the
“Settings / PRESSURE“
selection menu in accordance with
Fig. 14
.
The recommended target values of all settings
are documented in the form “Form for set values
of BWT bestaqua 14, 18“ (see Part 7.1).
2. Menu level (adjustable parameters)
X
START PRESSURE
Start pressure
(ACTIVE)
X
STOP PRESSURE
Stop pressure
X
STOP TIME DELAY
Time delay of the pump
Fig. 13:
Menu Level 2: “Settings/PRESSURE“
1x
