Operation
Butzbach GmbH Industrietore
Originalbedienungsanleitung SECTIOLITE_V1
24/02/2021
26
7.3.2 Switching the system off for control units with a CEE plug
✔
Switch off the system after consulting with and by authorised qualified personnel.
1.
To switch the door system off, unplug the CEE plug.
2.
Secure the CEE plug with a plug blocker and hanging lock during maintenance work.
7.4
Operation of the door for people (ST40T)
✔
Before the door for people may be operated, the door must be completely closed.
1.
Press the door (for people) button: Manually open and close the door for people toward the outside
(standard DIN left).
7.5
Emergency operation
In emergency situations and exceptional cases (e.g. in the event of a power outage), the door may be opened
by hand with a hand chain. When doing this, the safety information and warnings below and in
chapters 2 Safety and 3 Other dangers must absolutely be followed.
7.5.1 Sectional doors with door locks of resistance class WK3
Note!
It is optionally possible for the door for people to also be able to be opened from the inside while it is
closed (panic function): The door latch and door lock are then opened when the door bar is pressed.
Note!
Do not roll over the lower threshold with heavy loads, i.e. not with carts, forklifts or dollies that have hard
wheels (e.g. welding devices, etc.).
This leads to damage to the threshold and thus to impairment in the operation of the door for people and
the overall door. Please use the (larger) door for this.
Caution!
Remove electrical cylinders prior to emergency operation, otherwise there is the risk of property damage!
Note! Function of the CEE plug!
The CEE plug fulfils the function of an
isolation device
and simultaneously serves as an
EMERGENCY
SHUTOFF
device.
