BUTZBACH SECTIOLITE ST40, Руководство по эксплуатации

Страница: 30 / 42

Operation
Butzbach GmbH Industrietore Originalbedienungsanleitung SECTIOLITE_V1 24/02/2021
25
7.2 System operation
✔
The operator must ensure that no people or objects are in the immediate vicinity of the door during
opening and closing operations.
✔ If the operator of the door system does not have full visibility during operation, the operator must take
appropriate measures to ensure operational safety!
1. To open the door, press the OPEN button: the door opens and stops by itself. After it reaches its
end position, it turns off automatically.
2. To close the door, press the CLOSE button: the door closes and stops by itself. After it reaches its
end position, it turns off automatically.
3. To stop the door at any position during the door operation, press the STOP button. The door stops.
7.3 Switching the system off
7.3.1 Switching the system off for control units with a main switch
✔
Switch off the system after consulting with and by authorised qualified personnel.
1. To switch off the door system, turn the main switch to position 0 for OFF.
2. Secure the main switch with a hanging lock during maintenance work.
Note!
The testing of the door's electrical system must take place in accordance with the accident prevention
regulation DGUV Regulation 3 “Electrical systems and operational equipment” Sec. 5 Tests: The company
that is operating the corresponding electrical system or door system has the responsibility for the testing.
They are responsible for both the initial commissioning (initial testing) and for repeat testing due to various
reasons (annual testing, testing after a material change or repair).
Note! Function of the main switch!
The main switch fulfils the function of an isolation device and simultaneously serves as an EMERGENCY
SHUTOFF device.
Note! Function of the main switch!
The control unit can be converted to a dead man's switch operation (only by authorised service
personnel). Please contact the door manufacturer or your customer service.
Additional options are described in the control unit function description.