34
7. The extension/spring arm is now correctly mounted to the wall/ceiling.
8.
Reposition the electrical connector (slip ring) up into the extension/spring arm, and secure
it into place using the two screws which were set aside.
9.
Reinstall the covers by reversing the instructions followed for cover removal. Gently snap
the 2 pieces together, and check the parting line to ensure proper fit with no gaps.
8.0
Mounting the Light Head to the Spring Arm
A
B
C
D
E
F
G
H
1.
Join the connectors (
A
). Then push the joined connectors partially into the yoke T
-
junction (
B
). Do not bend or twist.
CAUTION:
make sure the connectors (
A
) are fully
engaged.
2.
Make sure the plastic bearing (
C
) is sitting on the yoke T
-
junction (
B
).
3.
Push the yoke T
-
junction (
B
) into the spring arm (
D
).
4.
Push the locking key (
E
) completely into the slot, so that the key is engaging in the yoke
T
-
junction groove (
F
).
5.
Rotate the collar (
G
)180 degrees until the hole in arm aligns with the set screw (
H
).
6.
Tighten set screw (
H
) so that collar (
G
) cannot be rotated. If the collar rotates, reposition
the set screw hole to the arm hole and try again. Once collar does not rotate, give set
screw another 1/2 turn.
CAUTION:
Do not over tighten the set screw or the damage to
the collar can occur.
WARNING:
It is critical that the locking key (
E
) is properly installed, the collar
(
G
) is rotated 180° and the set screw is correctly positioned and tightened .
Disregarding this instruction can present the risk of serious injury.
WARNING:
The spring arm is under a high spring load. If the spring arm is
lowered with out head unit, it
MUST
be held firmly. If it is released it will spring
up, possibly causing serious injury.
ELECTRIC SHOCK:
Disconnect all power and remove all fuses prior to
assembly.
Figure 45: Extension/Spring
Arm to head unit assembly.
Содержание AIMLED070 Series
