5.1 - Dimensions and mounting
To install the instrument into the panel, make
a 92x45 mm cutout and insert the instrument
into the panel from the front, placing the
sealing gasket between this and the front
bezel.
Place the fixing clips on both sides of the case
and slide them over the guide tracks until they
touch the panel at the rear side.
Press slightly to fasten the bezel to the panel
and secure the clips.
To take the instrument out of the panel, pull
outwards the rear tabs of the fixing clips to
disengange and slide them back over the case
43
PANEL
FIXING CLIPS
SEALING GASKET
CLEANING: The frontal cover should be
cleaned only with a soft cloth soaked in
neutral soap product.
DO NOT USE SOLVENTS
