Burster 9181, Инструкция по эксплуатации

Страница: 27 / 55

FRONT-PANEL FUNCTIONS IN PROG MODE
B
A
TARE
HOLD LIMIT MAX MIN DATA
DSP2 INP2 FLT STORE DSP1 INP1
2
1
4
3
TARE
RESET LIMIT MAX/MIN ENTER
ESC DATA
PROG
TEACH
PRG
RUN
PROG LED
Indicates programmation mode
AUXILIARY DISPLAY
Indicates program module
MAIN DISPLAY
Reads programming parameters
KEYBOARD IN PROG MODE
7
FLT LED
Indicates input filter programming.
ENTER KEY
Accepts data.
Advances program setps
KEY
Moves de flashing digit to the right
DSP2 LED
Indicates Display2 programming
Indicates Display# programming
KEY
Increments the flashing
digit value
INP2 LED
Indicates Input2 programming
Indicates Input# programming
ESC KEY
Returns to run mode at any program
step
TEACH KEY
Reads the INP1, INP2,
INP# value
DSP1 LED
Indicates Display1 programming
INP1 LED
Indicates Input1 programming
A and B LED's
Indicates program module
letter.
STORE LED
Indicates exit from de program
mode with data memory
storage.
27
This menu allows enabling and disabling the tare function and its reset.
MENU 2 - TARE
The initially programmed option appears on the display : [ UloCK = tare function
enabled, LoCK = tare function disabled ].
To switch between lock and unlock indications until desired option is
displayed.
ENTER
To save the option present on display and return to the run mode.
ESC
To exit from the programming mode without saving changes.
[27.2] Tare UloCk/LoCK
B
A
TARE
HOLD LIMIT MAX MIN DATA
DSP2 INP2 FLT STORE DSP1 INP1
2
1
4
3 TARE
RESET LIMIT MAX/MIN ENTER
ESC DATA
PROG
TEACH
PRG
RUN
The figure 27.1 shows the indication (tArE) corresponding to the tare menu. Press
ENTER
to acceed the configurations.
ENTER
To get access to the tare menu.
To Skip over this menu and pass to the next one.
ESC
To exit from the programming mode without saving changes.
[27.1] Tare menu
B
A
TARE
HOLD LIMIT MAX MIN DATA
DSP2 INP2 FLT STORE DSP1 INP1
2
1
4
3
TARE
RESET LIMIT MAX/MIN ENTER
ESC DATA
PROG
TEACH
PRG
RUN