Operating the Controls
Operating the Controls
6.3.7 Summer Mode
Summer mode can be activated by quickly pressing
the 1 button (less than 1 second). In the table be-
low, the information for summer mode status is
shown.
I
L
E
D
1
T
a
s
t e
1
Display
Display Element
Summer mode On
LED 1 = On
on / off
Summer mode Off
LED 1 = Off
6.3.8 Chimney Sweep Mode
Pressing the 1 button for 3-5 seconds until the dis-
play (E99) starts blinking. The unit will then run at
max. capacity (100%). The capacity can be reduced
to 0% with the 4 and 5 buttons.
I
L E
D
1
T
a
s
t e
1
4
5
T
a
s
t e
T
a
s
t e
L
E
D
4
Display
Display Element
E-Symbol
Segment B
blinking
Display Code 99
Segment C and D
The chimney sweep function can be turned off by pressing the 3 button, or after 30
min. the unit switches back to the normal heating mode automatically.
6.3.9 Installer Mode
The installer mode can be activated by quickly
pressing the 2 (less than 1 second). In the table be-
low, the respective information is shown.
II
L
E
D
2
T
a
s
t e
2
Display
Display Element
Index symbol alternates with the set-
point. After changing the set-point, it
will appear after 2 seconds
Segment B and C
alternating
Value of the chosen index
Segment B, C and D
Installer Mode
LED 2 = On
on
In the following table (next page), the available information is shown.
- 32 -
Gebr. Bruns GmbH is not responsible for typographical errors or technical inaccuracies and reserves the right to make adjustments.
Gebr. Bruns GmbH
•
Hauptstraße 200
•
26683 Saterland
•
Tel.: + 49 (0) 44 92 / 92 46-0
•
Fax: + 49 (0) 44 92 / 71 41
www.bruns-heiztechnik.de
•
