Burley LONGITUDE, Инструкция по установке, обслуживанию и эксплуатации

Страница: 8 / 20

Page 8 of 20
If required connect the cables from the valve to the receiver as shown. Do not force the
valve cable plug when inserting into the receiver – it only fits one way.
HT
Lead
SW
)
(yellow
TC
(
)
red
Valve
Cable
Ensure the battery switch on the gas access cover is in the O position & fit four AA (1.5V)
batteries into the receiver unit. Fit the PP3 (9V) battery into the transmitter (hand set).
Press the battery switch located on the underside of the gas access cover to the (I)
position. The handset should arrive already paired to the receiver, if the handset does
require pairing to the receiver turn to section 9.6.
Re-attach the holder to the appliance.
Remove plastic
cover & fit 4 AA
batteries.