Burley ASTUTE G4113, Инструкция по установке, обслуживанию и эксплуатации

Страница: 6 / 28

5
1.5
SLIDE CONTROL
1. Press the control lever firmly to the left of its travel and listen for the spark generator
clicking which should light the pilot.
2. Continue to hold down for a further 10 seconds.
3. If the pilot fails to stay alight, slide the control lever to the limit of its travel (off) & wait for 3
minutes & repeat the process.
4. Once the pilot is alight, lift the control lever to the desired position.
5. To turn the fire off lift the control lever to the top of its travel.
6. The off position on the side of the fire may not correspond exactly with the control lever.
This is only intended as an indication.
1.6 Battery Replacement
Behind the cover, located towards the right of the burner is the spark generator which is fitted
with the battery facing you. Flick out the battery from the right hand end of the battery holder
and remove battery. Replace with a good quality 1.5v AA battery ensuring the polarity
markings on the battery correspond with the markings on the battery holder. Check the spark
generator clicks when the control linkage is depressed downwards.