background image

MILLENIUM FREESTANDING MANUAL 2014

 

PYROGLOW® Gas Logs:   ADVANTAGES- Realistic surface textures & colours. Radiant       

natural glow  of an actual fire when burning. Natural looking logs when idle. Superior strength 

versus ceramic fibre.    Inert refractory formulation is ceramic fibre free. Pyroglow® logs create 

virtually no fume emission.   Thermal shock resistant. Contains no asbestos.

THESE APPLIANCES HAVE BEEN TESTED IN ACCORDANCE WITH AG 103 FOR 

 INSTALLATION AND OPERATION AS DESCRIBED IN THIS MANUAL  AND HAVE BEEN 

 CERTIFIED BY THE AUSTRALIAN GAS ASSOCIATION.

                                                                   

 WARNING:

All ILLusion Gas Log Appliances MUST be installed and serviced by an authorised installer or   technician.

 Unauthorised installation, service or maintenance may cause a hazardous situation.

    OWNERS INSTRUCTION & INSTALLATION MANUAL. PLEASE KEEP FOR FUTURE REFERENCE

MILLENIUM  GAS  LOG  HEATERS

       

HEAD OFFICE

145 STH. GIPPSLAND HWY. DANDENONG

VICTORIA AUSTRALIA 3175

PH:   (613) 9793 7520         

     

Email [email protected]

www.Illusionfires.com.au

 Illusion Australia Pty. Ltd.

The Illusion

Gas Log Fire

with 

PYROGLOW

®

Содержание MILLENIUM UGL32LP


























Отзывы: