Burley ASTUTE G4113, Инструкция по установке, обслуживанию и эксплуатации

Страница: 16 / 28

15
8.2 Fitting the Glass Panel
Important - Do not use this appliance with a broken or damaged glass panel. Do not operate the
appliance unless the glass panel is fitted correctly.
8.2.1 Engage the bottom edge of the glass in the groove of the front log support and within the sides
of the appliance opening. The printing should be on the inside of the glass and the larger of the black
strips should be at the bottom.
8.2.2 The top part of the glass panel should be engaged under the front vent panel. The vent panel
shall then be fixed using the 3 screws.
8.3 Fitting the Outlet Grille
8.3.1 Push and hold grille in position and secure grille
from underneath using the 3 screws provided.
8.4 Fitting the trim and backer assembly (if
required).
8.4.1 The trim and its backer are supplied as a
complete assembly.
8.4.2 A bracket is incorporated in the back of the trim
backer top edge to locate over the top flange of the
appliance.
8.4.3 Carefully opening the hinged trim will reveal
holes into which the retaining screws locate. Fit these
and tighten.