Burkert B0A1C2B1A4A0, Руководство по эксплуатации, Страница: 4 / 92


3
English
SE58
L
SAFETY INFORMATION
INTRODUCTION
TRANSMITTER
SENSOR
• These operating instructions and description of device functions are provided as part of the scope of
supply.
• They could be modified without prior notice. The improper use, possible tampering of the device or parts of
it and substitutions of any components not original, renders the warranty automatically void.
• The flowmeter realizes a measure with liquids of conductivity greater than 5µS/cm in closed conduits, and is
composed of a transmitter (described in this manual) and a sensor (refer to the specific manual).
• The transmitter could be coupled directly on the sensor (compact version) or coupled to the sensor by cable
supplied with it (remote version).
Any use other than described in this manual affects the protection provided by the manufacturer and
compromises the safety of people and the entire measuring system and is, therefore, not permitted. The
manufacturer is not liable for damaged caused by improper or non-designated use.
• Transport the measuring device to the measuring point in the original packaging. Do not remove covers or
caps before starting installation. In case of cartons packaging it is possible to place one above the other but
no more than three cartons. In case of wooden packaging do not place one above the other.
• Disposal of this product or parts of it must be carried out according to the local public or private waste
collection service regulations.
• The transmitter must only be installed, connected and maintained by qualified and authorized specialists
(e.g. electrical technicians) in full compliance with the instructions in this Operating Instruction, the
applicable norms, legal regulations and certificates (depending on the application).