Bull R424-E2, Инструкция по установке и эксплуатации, Страница: 53 / 182

Chapter 5: Advanced Serverboard Setup
5-11
5-6 Installing Memory
CAUTION
Exercise extreme care when installing or removing DIMM
modules to prevent any possible damage. Also note that the
memory is interleaved to improve performance (See step 1).
Installing a DIMM
Insert the desired number of DIMMs into the memory slots, starting with 1.
P1-DIMM 1A. For best memory performance, please install memory modules
of the same type and same speed on the memory slots as indicated on the
tables below. (See the Memory Installation Table Below.)
Insert each DIMM module vertically into its slot. Pay attention to the notch 2.
along the bottom of the module to prevent inserting the DIMM module incor-
rectly.
Gently press down on the DIMM module until it snaps into place in the slot. 3.
Repeat for all modules.
Memory Population for Optimal Performance
For a serverboard with One CPU (CPU1) installed
Branch 0 Branch 1 Branch 2
3 DIMMs P1-DIMM1A P1-DIMM2A P1-DIMM3A
6 DIMMs P1-DIMM1A P1-DIMM1B P1-DIMM2A P1-DIMM2B P1-DIMM3A P1-DIMM3B
Memory Population for Optimal Performance
For a serverboard with One CPU (CPU2) installed
Branch 0 Branch 1 Branch 2
3 DIMMs P2-DIMM1A P2-DIMM2A P2-DIMM3A
6 DIMMs P2-DIMM1A P2-DIMM1B P2-DIMM2A P2-DIMM2B P2-DIMM3A P2-DIMM3B
Memory Population for Optimal Performance
For a serverboard with Two CPUs installed
CPU1 CPU2
Branch 0 Branch 1 Branch 3 Branch 0 Branch 1 Branch 3
6 DIMMs 1A 2A 3A 1A 2A 3A
12 DIMMs 1A 1B 2A 2B 3A 3B 1A 1B 2A 2B 3A 3B