manualshive.com logo in svg

Bull R424-E2, Инструкция по установке и эксплуатации, Страница: 100 / 182

Поделиться
Скачать
Bull R424-E2 Скачать руководство пользователя страница 100

6-14

b

ullx R424-E2/R424-INF-E2 and R424-F2/R424-INF-F2 Installation and User's Guide

Figure 6-22.  Installing he Serverboard in the Serverboard Node Drawer

Installing the Serverboard

Review the documentation that came with your serverboard. Become familiar  

1. 

with component placement, requirements, precautions, and cable connec-

tions.

Pull the serverboard node drawer out of the back of the chassis. 2.

2. 

Remove the add-on card brackets:

3. 

3a. Remove screw securing the add-on card bracket to the back of the node 

drawer.

3b. Lift the bracket out of the node drawer.

Lay the serverboard in the node drawer aligning the standoffs with the 

4. 

serverboard.

Secure the serverboard to the node drawer using the rounded, Phillips head 

5. 

screws included for this purpose.

Install the adapter card associated with the serverboard if the chassis is a 

6. 

hot-swappable version. Refer to the next section for instructions on installing 

the adapter card

Secure the CPU(s), heatsinks, and other components to the serverboard as 

7. 

described in the serverboard documentation.

Содержание R424-E2























































































































































































Отзывы:

Нет отзывов