manualshive.com logo in svg

Bull R424-E2, Инструкция по установке и эксплуатации, Страница: 156 / 182

Поделиться
Скачать
Bull R424-E2 Скачать руководство пользователя страница 156

B-8

b

ullx R424-E2/R424-INF-E2 and R424-F2/R424-INF-F2 Installation and User's Guide

Deleting a RAID Volume

 

 

 

 

 

 

 

 

Warning:

 Make sure you back up your data before deleting a RAID set. 

You will lose all data on the disk drives when deleting a RAID set.

a. From the main menu, select item2-Delete RAID Volume, and press <Enter>. 

b. Use the <Up Arrow>, <Down Arrow> keys to select the RAID set you want to 

delete and press <Del>.  A warning message displays.

c. When asked "Are you sure you want to delete this volume (Y/N), press "Y" to 

delete the RAID volume, or type "N" to go back to the Delete Volume menu.

i. When asked "Are you sure you want to create this volume (Y/N), press "Y" to 

create the RAID volume, or type "N" to go back to the Create Volume menu.

!

Содержание R424-E2























































































































































































Отзывы:

Нет отзывов