Bull R424-E2, Инструкция по установке и эксплуатации, Страница: 5 / 182

III
Preface
About This Manual
This manual is written for professional system integrators and PC technicians. It
provides information for the installation and use of the bullx R424-E2/R424-INF-
E2 or the bullx R424-F2/R424-INF-F2. Installation and maintenance should be
performed by experienced technicians only.
The bullx R424-E2/R424-INF-E2 and R424-F2/R424-INF-F2 are 2U Bi-Twin
(four serverboards in a 2U chassis) rackmount server chassis and two R424-E2/
R424-INF-E2 or R424-F2/R424-INF-F2 serverboards. The R424-E2/R424-INF-E2
and R424-F2/R424-INF-F2 serverboards support Intel® 5500 Series Processor
(Nehalem) and Intel® 5600 Series Processor (Westmere).
Manual Organization
Chapter 1: Introduction
The fi rst chapter provides a checklist of the main components included with the
server system and describes the main features of the bullx R424-E2/R424-INF-E2
and R424-F2/R424-INF-F2 serverboards and the bullx R424-E2/R424-INF-E2 and
R424-F2/R424-INF-F2 chassis.
Chapter 2: Server Installation
This chapter describes the necessary steps to install the bullx R424-E2/R424-INF-
E2 or R424-F2/R424-INF-F2 into a rack and check out the server confi guration
prior to powering up the system. If your server was ordered without the processor
and memory components, this chapter will refer you to the appropriate sections
of the manual for their installation.
Chapter 3: System Interface
Refer to this chapter for details on the system interface, which includes the func-
tions and information provided by the control panel on the chassis as well as other
LEDs located throughout the system.
Preface