Bull R424-E2, Инструкция по установке и эксплуатации, Страница: 21 / 182

Chapter 2: Server Installation
2-1
Chapter 2. Server Installation
2-1 Overview
This chapter provides a quick setup checklist to get your bullx R424-E2/R424-INF-
E2 or R424-F2/R424-INF-F2 up and running. Following these steps in the order
given should enable you to have the system operational within a minimum amount
of time. This quick setup assumes that your system has come to you with the
processors and memory preinstalled. If your system is not already fully integrated
with a serverboard, processors, system memory etc., please turn to the chapter or
section noted in each step for details on installing specifi c components.
2-2 Unpacking the System
You should inspect the box the bullx R424-E2/R424-INF-E2 or R424-F2/R424-
INF-F2 was shipped in and note if it was damaged in any way. If the server itself
shows damage you should fi le a damage claim with the carrier who delivered it.
Decide on a suitable location for the rack unit that will hold the bullx R424-E2/
R424-INF-E2 or R424-F2/R424-INF-F2. It should be situated in a clean, dust-free
area that is well ventilated. Avoid areas where heat, electrical noise and electro-
magnetic fi elds are generated. You will also need it placed near a grounded power
outlet. Be sure to read the Rack and Server Precautions in the next section.
2-3 Preparing for Setup
The box the bullx R424-E2/R424-INF-E2 or R424-F2/R424-INF-F2 was shipped
in should include two sets of rail assemblies, two rail mounting brackets and the
mounting screws you will need to install the system into the rack. Follow the steps
in the order given to complete the installation process in a minimum amount of time.
Please read this section in its entirety before you begin the installation procedure
outlined in the sections that follow.
Choosing a Setup Location
Leave enough clearance in front of the rack to enable you to open the front
•
door completely (~63 cm/~25 inches).
Leave approximately 76 cm (30 inches) of clearance in the back of the rack to
•
allow for suffi cient airfl ow and ease in servicing.