Bull R424-E2 Скачать руководство пользователя страница 124

Страница: 124 / 182

8-12

ullx R424-E2/R424-INF-E2 and R424-F2/R424-INF-F2 Installation and User's Guide

IDE/SATA/Floppy Confi guration

When this submenu is selected, the AMI BIOS automatically detects the pres-

ence of the IDE devices and displays the following items:

SATA#1 Confi guration

If Compatible is selected, it sets SATA#1 to legacy compatibility mode, while

selecting Enhanced sets SATA#1 to native SATA mode. The options are

Disabled,

Compatible

and Enhanced.

Confi gure SATA#1 as

This feature allows the user to select the drive type for SATA#1. The options are

IDE

RAID and AHCI. (When the option-RAID is selected, the item-ICH RAID Code Base will

appear. When the option-AHCI is selected, the item-SATA AHCI will be available.)

ICH RAID Code Base (This feature is available when the option-RAID is se-

lected)

Select Intel to enable Intel's SATA RAID fi rmware to confi gure Intel's SATA RAID set-

tings. Select Adaptec to enable Adaptec's SATA RAID fi rmware to confi gure Adaptec's

SATA RAID settings. The options are

Intel

and Adaptec.

SATA AHCI (This feature is available when the option-AHCI is selected)

Select Enable to enable the function of Serial ATA Advanced Host Interface. (Take

caution when using this function. This feature is for advanced programmers only.)The

options are Enabled and

Disabled

. If the option-Enabled is selected, the following

item will display.

Hot Plug (This feature is available when the option-Enabled is selected)

Select Enable to enable the hot plug function for the SATA devices. The options

are

Enabled

and Disabled.

SATA#2 Confi guration

Selecting Enhanced will set SATA#2 to native SATA mode. The options

are Disabled, and

Enhanced

Содержание R424-E2























































































































































































Результаты поиска

Содержание R424-E2

Отзывы:

Bull R424-E2, Инструкция по установке и эксплуатации, Страница: 124 / 182

Результаты поиска

Содержание R424-E2

Отзывы: