Bull R424-E2, Инструкция по установке и эксплуатации, Страница: 49 / 182

Chapter 5: Advanced Serverboard Setup
5-7
5-5 Installing Processor and Heat Sink
!
When handling the processor package, avoid placing direct pressure on
the label area of the fan.
Installing an LGA 1366 Processor
1. Press the socket clip to release
the load plate, which covers the CPU
socket, from its locking position..
2. Gently lift the socket clip to open the
load plate.
Notes :
Always connect the power cord last and always remove it before adding, 1.
removing or changing any hardware components. Make sure that you install
the processor into the CPU socket before you install the CPU heatsink.
Make sure to install the serverboard into the chassis before you install the 2.
CPU heatsink and heatsink fans.
When purchasing a serverboard without a 5500 Series processor prein- 3.
stalled, make sure that the CPU socket plastic cap is in place, and none of
the CPU socket pins are bent; otherwise, contact the retailer immediately..
3. Hold the plastic cap at its north and
south center edges to remove it from
the CPU socket.
Socket clip
Plastic cap
Hold the north and south edges of
the plastic cap to remove it
Load plate