manualshive.com logo in svg

Bull R424-E2, Инструкция по установке и эксплуатации, Страница: 116 / 182

Поделиться
Скачать
Bull R424-E2 Скачать руководство пользователя страница 116

8-4

b

ullx R424-E2/R424-INF-E2 and R424-F2/R424-INF-F2 Installation and User's Guide

8-3  Advanced Setup Confi gurations

Use the arrow keys to select Boot Setup and hit <Enter> to access the submenu 

items:

X

Boot Features

Quick Boot

If Enabled, this option will skip certain tests during POST to reduce the time 

needed for system boot. The options are 

Enabled

 and Disabled. 

Quiet Boot

This option allows the bootup screen options to be modifi ed between POST 

messages or the OEM logo. Select Disabled to display the POST messages. 

Select Enabled to display the OEM logo instead of the normal POST messages. 

The options are 

Enabled

 and Disabled.

AddOn ROM Display Mode

This sets the display mode for Option ROM. The options are 

Force BIOS

 and 

Keep Current.

Bootup Num-Lock

This feature selects the Power-on state for Numlock key. The options are Off 

and 

On

.

Wait For 'F1' If Error

Содержание R424-E2























































































































































































Отзывы:

Нет отзывов