Bull R424-E2 Скачать руководство пользователя страница 157

Страница: 157 / 182

Appendix B: Intel HostRAID Setup Guidelines

B-9

Resetting to Non-RAID and Resetting a RAID HDD

Warning:

Be cautious when you reset a RAID volume HDD to non-RAID

or Resetting a RAID HDD. Resetting a RAID volume HDD or Resetting a

RAID HDD will reformat the HDD and delete the internal RAID structure

on the drive.

a. From the main menu, select item3-Reset Disks to Non- RAID, and press <Enter>.

The following screen will appear:

b. Use the <Up Arrow>, <Down Arrow> keys to highlight the RAID set drive to reset

and press <Space> to select.

c. Press <Enter> to reset the RAID set drive. A Warning message displays.

d. Press "Y" to reset the drive, or type "N" to go back to the main menu.

Exiting the Intel Matrix Storage Manager Utility

a. From the main menu, select item4-Exit, and press <Enter>. A warning message

will appear.

b. Press "Y" to reset the drive, or type "N" to go back to the main menu.

Содержание R424-E2























































































































































































Результаты поиска

Содержание R424-E2

Отзывы:

Bull R424-E2, Инструкция по установке и эксплуатации, Страница: 157 / 182

Результаты поиска

Содержание R424-E2

Отзывы: