Bull NovaScale R460 E1 Скачать руководство пользователя страница 358

Страница: 358 / 370

User Guide

357

www.bull.com

Click the Start menu, point to [Programs], [Accessories] and click [Windows

Explorer].

Run "setup.exe" in the following directory.

\002\win\winnt\w2k3amd\video\setup.exe

Follow the on-screen messages to proceed with the installation.

If the "Digital Signature could not been found." dialog message appears, select
[Yes] to continue.

Remove the ExpressBuilder DVD from the optical disc drive, restart the

system.

Installing SCSI Controller Drivers

Update the drivers for your system using the ExpressBuilder DVD shipped with your
system.

The SCSI controller drivers will be installed automatically.

Installing SAS Controller Driver (LSI SAS3443E-R)

Update your system with the ExpressBuilder DVD attached to your system.

The SAS controller driver will be installed automatically.

Installing a RAID controller Driver (LSILogic MegaRAID SAS 8480E)

Troubleshooting

The driver may sometimes not be installed during the OS installation. In this case,
please install the driver as described in the procedure below.

Start [Device Manager] from [Start] menu

→

[Control Panel]

→

[Administrative Tools]

→

[Computer Management].

Double-click the RAID Controller which the Device Manager lists as “Other

device”.

Click [Update Driver].

When the "Update Device Driver Wizard" appears, select "No, not this time"

and click [Next].

Select "Install from a list or specific location [Advanced]" and click [Next].

Select "Don't search. I will choose the driver to install" and click [Next].

Select "SCSI and RAID controller" and click [Next].

Click [Have Disk..].

Insert the ExpressBuilder DVD into the optical disc drive, enter

"\002\win\winnt\oemfd\dotnet\fd1" into "copy manufacturer's file from:" and
click [OK].

The installation of the driver is completed. Restart the system according to the on-
screen messages.

Содержание NovaScale R460 E1



















































































































































































































































































































































































Результаты поиска

Содержание NovaScale R460 E1

Отзывы:

Bull NovaScale R460 E1, Руководство пользователя, Страница: 358 / 370

Результаты поиска

Содержание NovaScale R460 E1

Отзывы: