manualshive.com logo in svg

Bull NovaScale R460 E1, Руководство пользователя, Страница: 326 / 370

Поделиться
Скачать
Bull NovaScale R460 E1 Скачать руководство пользователя страница 326

User Guide 

325 

www.bull.com

Creating from the [Autorun Menu]

This menu requires Microsoft Windows XP, Microsoft Windows Vista, Microsoft
Windows Server 2003 (or later).

You can create the Windows Server 2003 OEM-Disk for ExpressBuilder from the
[Autorun Menu], if you have the computer on which one of the above operating
system operates.

Follow the steps below:

1. 

Prepare a 3.5-inch floppy disks.

2. 

Start the operating system.

3. 

Insert the ExpressBuilder DVD in the optical device drive.

The Autorun menu is displayed.

4. 

Click [Create drive disk, and select [OEM Disk for Windows Server 2003].

Note: You can do the same operation using the menu

displayed by a right-click.

5. 

Insert the floppy disk into the floppy disk drive according to the message.

Windows Server 2003 OEM-Disk for ExpressBuilder will be created.

6. 

Write-protect and label the diskette, then keep it safely.

Содержание NovaScale R460 E1



















































































































































































































































































































































































Отзывы:

Нет отзывов