Bull NovaScale R460 E1, Руководство пользователя, Страница: 336 / 370

User Guide
335
www.bull.com
Re-install the Network Driver
The network driver will be installed automatically.
Adapter Fault Tolerance (AFT)/Adaptive Load Balancing (ALB)
Adapter Fault Tolerance (AFT) is a feature that creates a group containing more than
one adapter and converts the process of the working adapter to the other adapter in the
group when any trouble occurred on that adapter.
Adaptive Load Balancing (ALB) is a feature that creates a group containing more than
one adapter and enhance the through put by operating packet transmission from the
server by all the adapters.
Refer to “Adapter Fault Tolerance (AFT)/Adaptive Load Balancing (ALB)” on
page 308 for more information.
Graphics Accelerator Driver
The drivers for the graphics accelerator cards that are installed in the server will setup
automatically.
If you remove an additional graphics card, make sure to remove its corresponding
driver.
Should it be necessary to install manually the drivers, follow the procedure below.
1. Insert the ExpressBuilder DVD into the optical disc drive.
If the autorun menu is displayed, close the menu screen.
2. Click the Start menu, point to [Programs], [Accessories] and click [Windows
Explorer].
3. Run "setup.exe" in the following directory.
\002\win\winnt\w2k3amd\video\setup.exe
4.
Follow the on-screen messages to proceed with the installation.
If the "Digital Signature could not been found." dialog message appears, select
[Yes] to continue.
5. Remove the ExpressBuilder DVD from the optical disc drive, restart the
system.
Installing SCSI Controller Drivers
Update the drivers for your system using the ExpressBuilder DVD shipped with your
system.
The SCSI drivers will be installed automatically.
Installing SAS Controller Driver (LSI SAS3443E-R)
Update your system with the ExpressBuilder DVD attached to your system.
The SAS controller driver will be installed automatically.