Bull NovaScale R460 E1, Руководство пользователя, Страница: 294 / 370

User Guide
293
www.bull.com
Notes: If you connect the LSILogic MegaRAID SAS 8480E
RAID controller as a data disk, clear the RAID Controller's
configuration information before you perform the Express
Setup.
Re-installing to the hard disk drive which has been upgraded to Dynamic Disk
You cannot re-install Windows Server 2003 if the current partition of the hard disk
drive upgraded to Dynamic Disk remains. If you want to keep the current partition, see
“Appendix 6: Installing Microsoft Windows Server 2003 without Using Express Setup”
on page 320
or “Appendix 7: Installing Microsoft Windows Server 2003 x64 Editions
without using the Express Setup Tool” on page 341 .
About the System Partition Size
The system partition size can be calculated using the following formula.
Size necessary to install the Paging File Size + Dump File Size
+ Application Size
Size necessary to install the system
=
3500MB (Windows Server 2003 R2)
= 3500MB (Windows Server 2003 with Service Pack1)
= 3500MB (Windows Server 2003 R2 with Service Pack2)
= 5300MB (Windows Server 2003 R2 + ServicePack 2 CD-ROM)
Paging File Size (Recommended)= Mounted Memory Size * 1.5
Dump File Size= Mounted Memory Size + 12MB
Application Size= Required Size
Caution
■
The above-mentioned paging file size is recommended for
collecting debug information (memory dump). A paging file
with an initial size large enough to store the dump file in the
boot drive is required.
The correct debug information might not be able to be col-
lected due to a virtual memory shortage if the paging file is
insufficient, so set a size large enough for the entire system.
■
The maximum paging file size which can be set on one parti-
tion is 4095MB. If the above paging file size exceeds
4095MB, specify 4095MB for the paging file size.
■
The maximum dump file size for the system with more than
2GB memory mounted is ' 12MB'.