Bull NovaScale R460 E1 Скачать руководство пользователя страница 311 | Manualshive

Страница: 311 / 370

Bull NovaScale R460 E1 Скачать руководство пользователя страница 311

User Guide

310

www.bull.com

3.

Select the adapters to include in the team.

4.

Select "Adapter Fault Tolerance" or "Adaptive Load Balancing" and click

[Next].

5.

Click [Finish].

6.

If necessary to set the adapter priority setting, do as follows.

If not, go to step 7.

a.

Click [Settings] tab on [TEAM:xxx #yy Properties].

b.

Click [Modify Team].

c.

Point to the adapter [Intel(R)PRO/1000....]and click [Set Primary] or
[Set Secondary].

d.

Click [OK].

e.

The setup will go back to [EAM:xxx #yy Properties] and the priority
setting will display in list ().

f.

Click [OK]

7.

The setup will go back to [Intel (R) PROSet for Wired Connections] dialog

box, so click [OK].

8.

Restart the system.

Graphics Accelerator Driver

The standard graphics accelerator drivers that are mounted will be installed
automatically. Follow the procedure below if it is necessary to install manually.

If you want to use an optional Graphics Accelerator Driver board, follow the document
attached to the board to install the driver.

1.

Insert the ExpressBuilder into the optical disc drive. Close the Autorun menu if

it is displayed.

2.

Click the Start menu, point to [Programs], [Accessories] and click [Windows

Explorer].

3.

Run "setup.exe" in the following directory.

\001\win\winnt\dotnet\video\setup.exe.

4.

Follow the on-screen message to proceed with the installation.

If the dialog message "Digital Signature could not been found." appears, select
[Yes] to continue.

5.

Remove the ExpressBuilder from the optical disc drive, follow the on-screen

instructions and restart the system.

SCSI Controller Driver

Update your system with the ExpressBuilder DVD attached to your system.

The SCSI controller driver will be installed automatically.

Installing SAS Controller Driver (LSI SAS3443E-R)

Update your system with the ExpressBuilder DVD attached to your system.

The SAS controller driver will be installed automatically.

«
...
309
310
311
312
313
...
»

Содержание NovaScale R460 E1



















































































































































































































































































































































































Отзывы:

Нет отзывов