Bull NovaScale R460 E1, Руководство пользователя, Страница: 161 / 370

User Guide
160
www.bull.com
7. Remove the processor duct from the chassis.
Figure 113: Removing the Processor Duct
8. Open the levers at both sides of the socket from which you remove the DIMM.
The DIMM is unlock and ready for removal.
Figure 114: Removing the DIMM from the Socket
9. Hold the DIMM by the edges, lift it away from the socket, and store it in a anti-
static package.
10. Install the components you removed in steps 3 to 7.
11. Power on the server and verify that POST displays no error messages.
If POST displays an error message, take a note on the message and see the
POST error messages listed in
“POST Error Messages” on page 200 .
12. Start the SETUP and select [Advanced]
→
[Memory Configuration]
→
[Memory Retest]
→
[Enabled] to clear the error information of the removed
DIMM. (See “BIOS Setup Utility” on page 64 for details.)
13. Select "Yes" for [Reset Configuration Data] on the Advanced menu.
This setting is required to change the hardware configuration data. See “BIOS
Setup Utility” on page 64 for details.