Bull Cedoc NovaScale R423, Инструкция по установке и эксплуатации

Страница: 14 / 144

1-4
N
ovaS
c
ale R423 Installation and User's Guide
Serial ATA Subsystem
The NovaScale R423 server chassis supports up to six 3 Gb/s Serial ATA drives.
The Serial ATA drives are hot-swappable units and are connected to a backplane
that provides power and control.
Note: The operating system you use must have RAID support to enable the hot-
swap capability of the Serial ATA drives.
Front Control Panel
The control panel on the NovaScale R423 provides you with system monitoring and
control. LEDs indicate system power, HDD activity, network activity, system overheat
and power supply failure. A main power button and a system reset button are also
included. In addition, two USB ports have been incorporated into the control panel
to provide front side USB access.
I/O Backplane
The NovaScale R423 server chassis is an ATX form factor chassis designed to be
used in a 2U rackmount confi guration. The I/O backplane provides seven low-profi le
PCI expansion slots, one COM port, a parallel port, a VGA port, two USB 2.0 ports,
PS/2 mouse and keyboard ports and two gigabit Ethernet ports.
Cooling System
The NovaScale R423 server chassis has an innovative cooling design that includes
three 8-cm hot-plug system cooling fans located in the middle section of the chassis.
An air shroud channels the airfl ow from the system fans to effi ciently cool the proces-
sor area of the system. The power supply module also includes a cooling fan.