Bull Cedoc NovaScale R423 Скачать руководство пользователя страница 115

Страница: 115 / 144

Appendix C: Intel HostRAID

C-9

Resetting to Non-RAID and Resetting a RAID HDD

a. From the main menu, select item3-Reset Disks to Non- RAID, and press <En-

ter>. The following screen will appear:

b. Use the <Up Arrow>, <Down Arrow> keys to highlight the RAID set drive to

reset and press <Space> to select.

c. Press <Enter> to reset the RAID set drive. A Warning message displays.

d. Press "Y" to reset the drive, or type "N" to go back to the main menu.

Exiting the Intel Matrix Storage Manager Utility:

a. From the main menu, select item4-Exit, and press <Enter>. A warning mes-

sage will appear.

b. Press "Y" to reset the drive, or type "N" to go back to the main menu.

Warning:

Be cautious when you reset a RAID volume HDD to non-

RAID or Resetting a RAID HDD. Resetting a RAID volume HDD or

Resetting a RAID HDD will reformat the HDD and delete the internal

RAID structure on the drive.

Содержание NovaScale R423

















































































































































Результаты поиска

Содержание NovaScale R423

Отзывы:

Bull Cedoc NovaScale R423, Инструкция по установке и эксплуатации, Страница: 115 / 144

Результаты поиска

Содержание NovaScale R423

Отзывы: