Bull Cedoc NovaScale R423, Инструкция по установке и эксплуатации

Страница: 22 / 144

2-6
N
ovaS
c
ale R423 Installation and User's Guide
Installing the Rack Rails:
Determine where you want to place the NovaScale R423 in the rack. (See Rack
and Server Precautions in Section 2-3.) Position the fi xed rack rail/sliding rail guide
assemblies (made up of two inter-locking sections) at the desired location in the
rack, keeping the sliding rail guide facing the inside of the rack and the rollers
toward the front of the rack. Screw the assembly securely to the rack. Attach the
other assembly to the other side of the rack, making sure both are at the exact
same height and with the rail guides facing inward.
Installing the Server into the Rack
You should now have rails attached to both the chassis and the rack unit. The next
step is to install the server into the rack. Do this by lining up the rear of the chassis
rails with the front of the rack rails. Slide the chassis rails into the rack rails, keeping
the pressure even on both sides (you may have to depress the locking tabs when
inserting). See Figure 2-2.
When the server has been pushed completely into the rack, you should hear the
locking tabs "click". Finish by inserting and tightening the thumbscrews that hold
the front of the server to the rack.