background image

D-20

N

ovaS

c

ale R423 Installation and User's Guide

D-2  Installing Intel's ESB2 Driver by Adaptec and the OS 

Insert NovaScale R423 Resources CD that came with the package into the 

CD Drive during the system reboot, and the screen: "Super Micro Driver 

Diskette Maker" will appear.

Choose from the list the item: "Intel ESB2 Driver by 3rd Party (Adaptec)" and 

press <ENTER>.

From the next screen displayed, choose the OS driver you want to install and 

press <Enter>.

Insert a formatted diskette into drive A: and press <Enter> as prompted.

Exit the program after the process is completed. Then, reboot the system.

Insert the Microsoft Windows OS Setup CD in the CD Driver, and the system 

will start to boot up from CD.

Press the <F6> key when the message-"Press F6 if you need to install a third 

party SCSI or RAID driver" displays.

When the Windows OS Setup screen appears, press "S" to specify additional 

device(s).

Insert the driver diskette-"Adaptec Embedded Serial ATA Raid Controller 

Driver" into Drive A: and press the <Enter> key.

Choose the Adaptec Embedded Host Serial ATA Raid Controller from the list 

indicated in  the Windows OS Setup Screen, and press the <Enter> key.

Press the <Enter> key to continue the installation process. (If you need to 

specify any additional devices to be installed, do it at this time.) Once all 

devices are specifi ed, press the <Enter> key to continue with the installation.

From the Windows OS Setup screen, press <Enter>. The OS Setup will 

automatically load all device fi les, and, then, continue with the Windows OS 

installation.

After the Windows OS Installation is completed, the system will automatically 

reboot.

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

Содержание NovaScale R423

















































































































































Отзывы: