Bull Cedoc NovaScale R423 Скачать руководство пользователя страница 128

Страница: 128 / 144

D-12

ovaS

ale R423 Installation and User's Guide

Adding/Deleting Hotspares

To add a Hotspare:

Note

: In order to rebuild a RAID (RAID 0 or RAID 1), you would need to add a

new HDD as a hotspare.

1. From the main menu (shown on Page D-4), select Add/Delete Hotspares.

2. Use the up and down arrow keys to highlight and select the disk you want to
designate as a hotspare, and press <Insert>, and then, press <Enter>.

3. Press Yes when the following prompt is displayed:

"Do you want to create spare?" (Yes/No?)

The spare you have selected will appear in the Selected drives Menu.

o delete a Hotspare:

1. From the main menu (shown on Page D-4), select Add/Delete Hotspares.

2. Use the up and down arrow keys to highlight and select the Hotspare you want
to delete, and press <delete>, and then, press <Enter>.

3. When the following warning is displayed: "Do you want to delete the hot spare?"
(Yes/No?), press Yes to delete the hotspare you have selected.

Содержание NovaScale R423

















































































































































Результаты поиска

Содержание NovaScale R423

Отзывы:

Bull Cedoc NovaScale R423, Инструкция по установке и эксплуатации, Страница: 128 / 144

Результаты поиска

Содержание NovaScale R423

Отзывы: