Bulex Thema Condens AS 48-A Скачать руководство пользователя страница 58

Страница: 58 / 199

MAKSİCONDENSE 48-65

Notes

01/2018

Training 0020260859_00

3.1.6.2 Condensate discharge hose (scope of delivery)

Condensate hose

The hose is used to discharge the condensate to a siphon that must be additionally created on-site.
The siphon feeds the condensate into the local sewage system.

The hose has a rubber connector, which is placed on the unit siphon's drain connection.

Please comply with the national regulations regarding the draining of condensate.

The units have a nominal heat input of 48

–65 kW; in some markets this may lead to

a neutralisation device being installed upstream.

3.1.6.3 Drain hose for precipitation discharge

As an innovation, the accessory includes an additional hose for the precipitation drainage. Still with-
out image display.

Содержание Thema Condens AS 48-A








































































































































































































Результаты поиска

Содержание Thema Condens AS 48-A

Отзывы:

Bulex Thema Condens AS 48-A, Руководство пользователя, Страница: 58 / 199

Результаты поиска

Содержание Thema Condens AS 48-A

Отзывы: