Buhnen HB 5010, Перевод оригинального руководства по эксплуатации

Страница: 30 / 142

Programming
22
1 SingleOnOff
2 Mode
3 Language/Sprache
4 Password
4 Temperature
5 Timecontrolled
6 Date / Time
7 System
8 Factory set up
9 Password
9 Maxvalues
10 Waiting Time
11 Settings Pump
12 Celsius/Fahrenhei
13 List of sensors
14 Operating Paramet
15 Optimizing
Level 1 (Worker)
Level 2 (Foreman)
Level 3
(Trained Service Personnel only)
default: 1234
9744
Figure 6.1/1: Overview of menu structure
6.2 Navigation
The “up/down arrow,“ “enter,” and “ESC” keys are used to navigate in the menu structure
(see Chapter 3.3.3).
Press the “Menu” key to switch the tank system to programming mode. The display shows
the menu items of Level 1 (see Figure 6.1/1).
Use the “Up/Down Arrow” to select the desired menu item. You can recognize the current
menu item by the flashing cursor between the serial number and the associated menu
item.
Press “Enter” to confirm your entry.
The selected menu item is displayed.
If this menu item is divided into submenus, you can switch between the submenus with
the “Up/Down Arrow.” Use “Enter” again to select the desired submenu. Navigation within
the individual parameters occurs in the same manner.
• Select the desired parameter in the list using the “Up/Down Arrow.”
• Press ”Enter” to activate the parameter
• Use the “Up/Down Arrow” to set the desired value.
• Press “Enter” to confirm the value.
“Esc” takes you back to the next higher Level in the menu structure.
Esc