Buhnen HB 5010, Перевод оригинального руководства по эксплуатации

Страница: 20 / 142

Overview of HB 5010
12
3.3.1 Main switch
The entire tank system is turned on and off with the main switch.
In the disconnected condition, the system is switched completely to zero current.
3.3.2 Display
The display shows the current process values in the normal mode:
1. Time
2. Target and actual values of tank, pump, hose, and pistol temperatures.
3. Operating conditions (time-controlled, manually controlled, heating mode on/off, etc.)
The process values of the individual components (tank, pump, Hose 1, Pistol 1, etc.) are
displayed in succession. The next display is switched to after approx. 3 seconds.
Tank 12:32
Act=82
0 C Set=180 0 C
Preheating time
Handcontrolled, wait
Figure 3.3.2/1: Display example (normal mode)
3.3.3 Keypad
Esc
Figure 3.3.3/1: Keypad
The keypad has 8 membrane keys which protects them from environmental effects. All
operating and programming entries are made using these keys. The functions of the keys
are described individually in the following:
Escape (Cancel)
Use this key to exit a menu function. You are taken to the next higher level in the menu
structure.
Down arrow
This key has 2 functions:
• When maneuvering in the menu structure, the cursor is moved down one line in the
display or moved to the next position.
• When entering a value, the current value is decreased.
Up arrow
This key has 2 functions:
• When maneuvering in the menu structure, the cursor is moved up one line in the dis-
play or moved back one position.
• When entering a value, the current value is increased.
.
Esc